Different types of pouch making machines have different requirements. It
depends on whether you are using vacuum pouch making machine or stand up zipper pouch making machine, or other types of pouch making machines. Here are
some simple ways to identify them.
1.If the two sides of the
sealing are not strong, This may be caused by that knife is too sharp.
If only
one side is not strong, This may be due to the inaccurate angle of the cutter.
2.If the bottom seal is not
strong, it is mainly reflected in
①Insufficient pressure on the sealing knife
②There is a heating piece that is broken.
3.The cutter temperature is not up to standard, the
temperature of the equipment does not match the sealing temperature
of the pouch material .
4. If the position of the seal is very low, and the printing
position of the product is very close to the edge of the edge, such a situation
is likely to cause the pouch to be sealed unqualified.
5. It is the Unwinding speed is slow that will cause problems in
the sealing.
You can check the condition and discharge
of the pouch making machine through the above aspects when you have that
situation.
